CSLA2EN Datasheet | Honeywell

Solid State Sensors Linear Current Sensors Features ɀ Linear output ɀ AC or DC current sensing ɀ Through-hole design ɀ Fast response time ɀ Output voltage isolation from input ɀ Minimum energy dissipation ɀ Maximum current limited only by conductor size ɀ Adjustable performance and built-in temperature pensation assures reliable operation ɀ Accurate, low cost sensing ɀ Operating temperature range - 25 to 85°C ɀ Housing: PET polyester ORDER GUIDE - BOTTOM MOUNT WITH 9SS SENSOR, SOURCE OUTPUT Mtg. Dim. Fig. 1 1 2 1 2 1 2 1a 2 1a 1a Supply Volt. (Volts DC) 8 to 16 8 to 16 8 to 16 8 to 16 8 to 16 8 to 16 8 to 16 8 to 16 8 to 16 8 to 16 8 to 16 Supply Current (m A Max.) 19 19 19 19 19 19 19 19 19 19 19 Sensed Current (Amps Peak) 57 75 75 100 120 150 225 225 325 325 625 Offset Volt. (Volts±10%) Vcc/2 Vcc/2 Vcc/2 Vcc/2 Vcc/2 Vcc/2 Vcc/2 Vcc/2 Vcc/2 Vcc/2 Vcc/2 Sensitivity m VȿN- At 12 VDC Nominal ± TOL 49.6 39.4 39.1 29.7 24.6 19.6 13.2 13.2 9.1 9.4 5.6 5.8 4.4 4.8 2.7 2.1 1.8 1.2 1.5 1.7 1.3 1.3 Offset Shift (%/°C) ±.05 ±.05 ±.05 ±.05 ±.05 ±.05 ±.05 ±.05 ±.05 ±.05 ±.05 CS Series LINEAR CURRENT SENSORS MICRO SWITCH CS series linear current sensors incorporate our 91SS12-2 and SS94A1 linear output Hall effect transducer (LOHETTM). The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configuration as shown in mounting dimension figures 1, 1a, 2 and 2a. Normal mounting is with 0.375 inch long 4-40 screw and square nut (not provided) inserted in the housing or a 6-20 self-tapping screw. The bination of the sensor, flux collector, and housing prises the holder assembly. These sensors are ratiometric. Catalog Listing CSLA1CD CSLA1CE CSLA1DE CSLA1CF CSLA1DG CSLA1CH CSLA1DJ CSLA1EJ CSLA1DK CSLA1EK CSLA1EL Response Time (µ Sec.) 3 3 3 3 3 3 3 3 3 3 3 BOTTOM MOUNT WITH SS9 SENSOR, SINK/SOURCE OUTPUT Mtg. Dim. Fig. 1 1 2 1 2 2 2 1a 2 1a 1a 1a Supply Volt. (Volts DC) 6 to 12 6 to 12 6 to 12 6 to 12 6 to 12 6 to 12...