CTX-95 Datasheet | Honeywell

Description .. City Tie Expander The CTX-95 is either surface or flush mounted and has an integral LED that lights at device activation. g2282ph1.jpg Operation The CTX-95 is a programmable reverse polarity city tie circuit. The module contains the XP-95 protocol to municate with the Gamewell-FCI 600 Series of analog addressable control panels. The module provides the power and supervision for the reverse polarity city tie. Programming CTX-95 selected circuits insures that only their alarms and troubles are transmitted to the central station. Features - - - - - patible with all Gamewell-FCI 600 Series analog addressable FACPs. Connects to addressable SLC. Provides one reverse polarity circuit. Over-voltage protector built-in. LED annunciates activation. Fully supervised. Surface or flush mounting. Field programmable. Style 4, 6, or 7 wiring. Programming The CTX-95 is programmed by setting a single DIP switch easily accessible on the device’s printed circuit board. The DIP switch is used to set the address of the CTX-95. All other programming is acplished at the Fire Alarm Control Panel, either through a laptop puter or through the Control Panel Operator’s Display. - - - - - Screw terminals for field-wiring connections. Mounting The CTX-95 mounts in a standard 4.688" (11.908 cm) electrical backbox. The CTX-95 should be mounted in an easily accessible location so that the LED may be seen for quick indication of proper connection and activation. An ISO 9000-2000 pany SIGNALING Microsoft® Windows® is a registered trademark of Microsoft® Corporation. S521 7300-1288:147 GAMEWELL-FCI Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2007 Honeywell International Inc. All rights reserved. .gamewell-fci. CS-2042 Rev. A page 1 of 2 12 Clintonville Road, Northford,...