VF526DT Datasheet PDF - Honeywell Dual Hall-effect Digital Position Sensor Specs

VF526DT - Dual Hall-effect Digital Position Sensor

Datasheet Summary

Description

The VF526DT Bipolar Latch, Dual Hall-effect Digital Position Sensor has two distinct Hall sensing elements precisely located 1,4 mm [0.055 in] apart on a single integrated circuit chip.

The elements are encapsulated in a thermoset molding material.

Features

Temperature-compensated magnetics and ultra-low offset drift with temperature provides a stable output over a full temperature range of -40 °C to 125 °C [-40 °F to 257 °F]. Single, miniature 4-pin SOT-89B plastic package supplied on tape and reel for automated assembly, allowing potential savings in PC board space and labor cost. Two separate built-in Hall sensors and their associated logic circuitry provide a frequency signal for speed output and a logic level (high or low) signal for direction.

Datasheet Details

Part number	VF526DT
Manufacturer	Honeywell
File Size	223.97 KB
Description	Dual Hall-effect Digital Position Sensor
Datasheet	VF526DT Datasheet
Additional preview pages of the VF526DT datasheet.

📁 Similar Datasheet

VF5220 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5244 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5000 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5120 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5144 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5320 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5420 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5520 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF5544 - 5 Port Pilot Operated Solenoid Valve Rubber Seal (SMC)

VF594 - ECM Surface Mount VCXO (ETC)

Full PDF Text Transcription

Click to expand full text

DESCRIPTION The VF526DT Bipolar Latch, Dual Hall-effect Digital Position Sensor has two distinct Hall sensing elements precisely located 1,4 mm [0.055 in] apart on a single integrated circuit chip. The elements are encapsulated in a thermoset molding material. The two active Hall latches provide speed and direction indication of a magnetic gradient (such as a rotating ring magnet) across the face of the package. The VF526DT’s built-in temperature compensation is designed to match the temperature coefficient of low-cost magnets, allowing for a reliable, yet cost-effective, sensor-magnet combination. A unique, regulator circuit provides extremely stable operation with supply voltages from 3.4 Vdc to 24 Vdc.

Published: May 19, 2015 |