HUSB362 Datasheet | Hynetek

FEATURES - USB Type-C PD Source with PPS Supported - pliant with USB Type-C Specification Reversion 2.1 - 28 V EPR FPDO and EPR AVS Supported - Integrated VCONN Power for e Marker Detection - Both N-MOS and P-MOS Supported - Multiple DPDM Charging Protocols Implemented - BC1.2 DCP and Divider 3 - QC2.0, QC3.0, AFC, FCP and UFCS - Up to 35 V Maximum Voltage Rating at USB Type-C Connector Pins - Programmable Constant Voltage and Constant Current Control - Fault Protections including Over-voltage Protection, Over-current Protection, Short Circuitry Protection, Over-temperature Protection, Under-voltage Protection, CC Overvoltage Protection, DPDM Over-voltage Protection, Thermal Shut Down - 32-bit RISC-V MCU with 32 k B MTP Memory - Sleep Mode Supported - ±4 k V HBM ESD Rating for all of Type-C Connector Pins APPLICATIONS Travel Adaptor Car Charger GENERAL DESCRIPTION HUSB362 is designed for a USB Type-C PD Source product. It can support up to multiple PDOs with programmable voltage and current for different applications, such as PPS PDOs, EPR PDOs. All of PDOs are fully pliant with USB PD 3.1 Specification Rev.1.4. Besides, HUSB362 implements DPDM charging protocols. Both D+ and D- pins can be configured to support QC2.0, QC3.0, AFC, FCP, UFCS and divider 3 mode which provide excellent patibility for the legacy devices. It integrates an GATE driver to enable the VBUS from VIN to protect the devices connected with Type-C connector. Only 300u A operation current is needed for HUSB362 during sleep mode. The high voltage tolerance and protections at CC1, CC2, D+ and D- pins provides more reliability for the system. ADVANCE INFORMATION TYPICAL APPLICATION CIRCUIT 1kΩ 680μF 1μF/35V 1kΩ 100n F/35V 1kΩ 100n F/35V PIN 1 GND VIN OPTO VBUS GPIO0 1μF/6.3V GATE HUSB362 IFB QFN-16 D+ D- CSCC1 CC2...