HY29F002T Datasheet PDF - Hynix Semiconductor 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory Specs

HY29F002T - 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory

Datasheet Summary

Description

The HY29F002T is an 2 Megabit, 5 volt-only CMOS Flash memory organized as 262,144 (256K) bytes.

The device is offered in industrystandard 32-pin TSOP and PLCC packages.

The HY29F002T can be programmed and erased in-system with a single 5-volt VCC supply.

Features

n 5 Volt Read, Program, and Erase.
Minimizes system-level power requirements n High Performance.
Access times as fast as 45 ns n Low Power Consumption.
20 mA typical active read current.
30 mA typical program/erase current.
1 µA typical CMOS standby current n Compatible with JEDEC Standards.
Package, pinout and command-set compatible with the single-supply Flash device standard.
Provides superior inadvertent write protection n Sector.

Datasheet Details

Part number	HY29F002T
Manufacturer	Hynix Semiconductor
File Size	382.00 KB
Description	2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory
Datasheet	HY29F002T Datasheet
Additional preview pages of the HY29F002T datasheet.

📁 Similar Datasheet

HY20-P - Current Transducers HY 5 to 25-P (LEM)

HY2000 - 30 WATT POWER AMP (ETC)

HY2001 - 30 WATT POWER AMP (ETC)

HY2002 - Power Amplifier (ILP)

HY2002220 - Size 23 Stepper Motor (ETC)

HY2004 - 120 WATT POWER AMP (ETC)

HY2110 - 1-Cell Lithium-ion/Lithium Polymer Battery Packs Protection ICs (HYCON Technology)

HY2111 - 1-Cell Lithium-ion/Lithium Polymer Battery Protection (HYCON)

HY2112 - 1-Cell LiFePO4 Battery Protection (HYCON)

HY2113 - 1-Cell Lithium-ion/Lithium Polymer Battery Protection (HYCON)

Full PDF Text Transcription

Click to expand full text

HY29F002T 2 Megabit (256K x 8), 5 Volt-only, Flash Memory KEY FEATURES n 5 Volt Read, Program, and Erase – Minimizes system-level power requirements n High Performance – Access times as fast as 45 ns n Low Power Consumption – 20 mA typical active read current – 30 mA typical program/erase current – 1 µA typical CMOS standby current n Compatible with JEDEC Standards – Package, pinout and command-set compatible with the single-supply Flash device standard – Provides superior inadvertent write protection n Sector Erase Architecture – Boot sector architecture with top boot block location – One 16 Kbyte, two 8 Kbyte, one 32 Kbyte and three 64K byte sectors – A command can erase any combination of sectors – Supports full chip erase n Erase Suspend/Resume – Temporarily suspends a sector erase ope

Published: Apr 2, 2005 |