iC-VP Datasheet | IC-Haus

i C-VP PHOTO SWITCH Features o High spectral sensitivity o Sensitive to visible light and near infrared o Adjustable threshold o Short switching time o Supply voltage of 4.5 to 16 V o CMOS-/LSTTL-patible output o Photo sensor size: 400 µm x 400 µm o Option: extended temperature range of -40 to 125 °C Rev A1, Page 1/6 APPLICATIONS o Receiver for reflecting and non-reflecting light barriers o Multi-chip modules for absolute encoders PACKAGES BLOCK DIAGRAM 4.5..16 V TO18-4L (lens) TO18-4F (flat) - Ai VCC P DRIVER A OUT iph 1 k i C- VP THRESHOLD ISET Rset 10 k Ω Copyright © 2011 i C-Haus http://.ichaus. i C-VP PHOTO SWITCH Rev A1, Page 2/6 DESCRIPTION The i C-VP is a photocurrent amplifier with threshold switch and monolithic integrated sensor diode. The device is meant as a photoelectric detector, in light barriers for example. The threshold is adjusted with an external resistor. After approx. 1 µs delay a photo current of sufficient magnitude creates a low signal which is patible with CMOS and LSTTL levels at the output. The i C-VP can be utilised in a customised COB package as a multi-chip module for multi-channel scanning absolute encoders. TO18 metal can packages are available for singlechannel light barrier applications. PACKAGES TO18-4L/F PIN CONFIGURATION 24 photosensitive area 3 Optical input from top PHYSICAL DIMENSIONS (in mm) 5,4 4,7 2,54 PIN FUNCTIONS No. Name Function 1 GND 2A 3 ISET 4...