IC MICROSYSTEMS X76F101
The X76F101 is a Password Access Security Supervisor, containing one 896-bit Secure Serial Flash array. These passwords protect read and write •Programmable Passwords •32-bit Response to Reset (RST Input) •8 byte Sector Write mode operations of the memory array. The X76F101 features a serial interface and software protocol allowing operation on a popular two wire bus.| Part No. | X76F101 |
|---|---|
| Datasheet | X76F101 Download |
| Manufacturer |  IC MICROSYSTEMS |
| Description | Secure SerialFlash |
| Buy | Stock & Price |
DESCRIPTION
128 x 8 bitFEATURES
●64-bit Password Security●One Array (112 Bytes) Two Passwords —Read Password —Write Password Access to the memory array can be controlled by two 64-bit passwords. The bus signals are a clock Input (SCL) and a bidirectional data input and output (SDA). Access to the device is controlled through a chip select (CS) input, allowing any number of devices to share the same bus. The X76F101 also features a synchronous response to reset providing an automatic output of a hard-wired 32-bit data stream conforming to the industry standard for memory cards. TM The X76F101 utilizes Xicor’s proprietary Direct Write
●1MHz Clock Rate
●2 wire Serial Interface
●Low Power CMOS —3.0 to 5.5V operation —Standby current Less than 1µA —Active current less than 3 mA
●High Reliability Endurance: —100,000 Write Cycles
●Data Retention: 100 years
●Available in: —8 lead PDIP, SOIC, MSOP and ISO Card —SmartCard Module cell, providing a minimum endurance of 100,000 cycles and a minimum data retention of 100 years.
