IC Microsystems ICL2001-23
The ICL2001-23 can be used for amplification in IF or RF buffer amplifiers. The amplifier provides a gain of 15dB typically at 850 MHz and has single ended input and output. The device can be operated with a single +3V supply.| Part No. | ICL2001-23 |
|---|---|
| Datasheet | ICL2001-23 Download |
| Manufacturer | IC Microsystems |
| Description | Low Noise Amplifier |
| Buy | Stock & Price |
DESCRIPTION
Bias resistor of appropriate value connected to this pin externally controls the bias current in the circuit and thus the gain. Ground connection. Keep traces physically short and immediately connect to ground plane. RF input pin. This pin is not internally DC blocked and thus requires an external blocking capacitor suitable for the frequency of operation. Bias should be supplied to this pin externally. Please note that an RF choke inductor is required. The supply should be well-bypassed. Same as Pin 1 RF output pin. This pin is not internally DC blocked and thus requires an external blocking capacitor suitable for the frequency of operation. $ Symbol VCC TOP TSTG TSOL Parameter Positive Power Supply " Value +4.0 -40 to +85 -65 to +150 300 Unit VDC o o o ! Part "DESCRIPTION
6L-SOT23, 3V LNA Fully Assembled Evaluation Board ICL2001-23 ICL2001-23-EVAL ! Parameter VCC TOP Operating Temperature Storage Temperature Soldering Temperature C C C Value +3.0 +25 Unit VDC o Note: Stress greater than those listed above may cause permanent damage to the device.
