Datasheet4U Logo Datasheet4U.com

IP101ALF - Single port 10/100 Fast Ethernet Transceiver

General Description

IP101A LF is an IEEE 802.3/802.3u compliant single-port Fast Ethernet Transceiver for both 100Mbps and 10Mbps operations.

It supports Auto MDI/MDIX function to simplify the network installation and reduce the system maintenance cost.

Key Features

  • 10/100Mbps TX Full-duplex or half-duplex Supports Auto MDI/MDIX function Fully compliant with IEEE 802.3/802.3u Supports IEEE 802.3u auto-negotiation Supports MII / RMII / SNI interface IEEE 802.3 full duplex control specification Supports Automatic Power Saving mode Supports BaseLine Wander (BLW) compensation Supports Interrupt function Supports repeater mode Single 3.3V power supply with built-in 2.5V regulator DSP-based PHY Transceiver technology Using either 25MHz crystal/oscillator or 50MHz.

📥 Download Datasheet

Datasheet Details

Part number IP101ALF
Manufacturer IC Plus
File Size 2.46 MB
Description Single port 10/100 Fast Ethernet Transceiver
Datasheet download datasheet IP101ALF Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IP1001 Full Function Synchronous Buck Power Block International Rectifier
IP103H Voltage and Current Controller Interpion semiconductor
IP1060A SWITCHED MODE POWER SUPPLY CONTROL CIRCUIT Seme LAB
IP1060B SWITCHED MODE POWER SUPPLY CONTROL CIRCUIT Seme LAB
IP1117 LDO Regulator Interpion semiconductor

Other Datasheets by IC Plus

Part Number Description
IP101A Single port 10/100 Fast Ethernet Transceiver
IP101G Fast Ethernet Transceiver
IP101GA Fast Ethernet Transceiver
IP101GR Fast Ethernet Transceiver
IP101GRI Fast Ethernet Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IP101A LF Data Sheet Single port 10/100 Fast Ethernet Transceiver Features 10/100Mbps TX Full-duplex or half-duplex Supports Auto MDI/MDIX function Fully compliant with IEEE 802.3/802.3u Supports IEEE 802.3u auto-negotiation Supports MII / RMII / SNI interface IEEE 802.3 full duplex control specification Supports Automatic Power Saving mode Supports BaseLine Wander (BLW) compensation Supports Interrupt function Supports repeater mode Single 3.3V power supply with built-in 2.5V regulator DSP-based PHY Transceiver technology Using either 25MHz crystal/oscillator or 50MHz oscillator REF_CLK as clock source Flexible LED display for speed, duplex, link, activity and collision Supports flow control to communicate with other MAC through MDC and MDIO 0.