IP178GG Datasheet | IC Plus

Features General Description z 8 port Embedded 10/100 PHY Switch Controller IP178Gx is fabricated with advanced CMOS z IP178G Support 8 100Base TX (85nm) technology and only requires a 3.3V single z IP178GH/GI support 8 100Base TX or 6 100Base power supply. This feature makes IP178GX used TX + 2 FX very low power consume, such as the full load z 100M PHY support IEEE802.3az at full duplex operation (100Mbps full duplex 8 ports), it only z 10M PHY only support 10Base Te takes 0.95W. z Support Auto MDI-MDIX function z Power Management Tool (PWMT®) IP178Gx also supports Power Management Tool - APS, auto-power saving while Link-off (PWMT®) for IEEE 802.3az, APS, WOL+ and PWD - IEEE 802.3az protocol based power saving for Green Power. While two link devices have no - WOL+®, light traffic power saving - PWD, force-off power saving z Support Auto Factory Test (AFT®) IEEE 802.3az capability, IP178Gx use WOL+ to change link from 100Mbps to 10Mbps for saving power. z Single Power 3.3V supply z Built in 1.1V core voltage LDO Regulator z Two Priority queues per port z Support 802.1p & Diff Serv based Qo S z Qo S - Port base The PWD, force-off power saving of IP178Gx is designed for power down switch immediately by pushing a button, user don’t plug out the power adapter. Push the button again, it will power on immediately. - 802.1p - IP Diff Serv IPV4/IPV6 Except Low Power and Rich Power Saving - TCP/UDP port number method, IP178Gx supports AFT® for saving - Pins configure ports priority (VIP port) Customer Testing Cost. By using a push button and z Support max forwarding packet length 1552/1536 cables, IP178Gx will Auto test pletely by itself. bytes option z Embedded 448K bits packet buffer z Support port mirror function z Support 1k MAC address z Support broadcast storm protection z Support port trunking (Link Aggregation) z Support 16 VLAN (IEEE Std 802.1q) - Port-based/Tagged-based VLAN - Support Port-based insert, remove tag z Built-in 50...