SF0140BA03071S
SF0140BA03071S is Filter manufactured by ICS.
..
Integrated Circuit Systems, Inc.
140 MHz SAW Low-Loss Filter 12 MHz Bandwidth Part Number SF0140BA03071S
TYPICAL PERFORMANCE
Horizontal: 4 MHz/div
Vertical (from top):
Magnitude Group Delay Deviation
10,1 100 d B/div ns/div
SPECIFICATION
Parameter Center Frequency ( Fc) 1 Insertion Loss 1 d B Bandwidth 3 d B Bandwidth 35 d B Bandwidth Passband Ripple 2 Phase Ripple 2 Group Delay Ripple 2 Absolute Delay Ultimate Rejection Temperature Coefficient of Frequency Substrate Material Source and Load Impedance Ambient Temperature
Notes:
Min 139.6
Typ Max 140.0 140.4 10.4 12.5 10.2 11.7 12.0 12.7 16.1 21.3 0.74 1.0 10 15 50 120 1.0 40 47 -90 YZ Lithium Niobate 50 25
Units MHz d B MHz MHz MHz d B p-p deg p-p ns p-p us d B ppm/ºC Ω ºC
1. Average of lower and upper 3 d B frequencies. 2. Measured over 90% of the 3 d B bandwidth. 3. Typical change of filter frequency response with temperature is ∆f/fref = (T-Tref)- Tc ppm.
Rev X5 21-Apr-05
Page 1 of 2
Integrated Circuit Systems
- Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA
- Phone 508-852-5400
- Fax 508-852-8456 .icst.
QF12/3
Integrated Circuit Systems, Inc. PACKAGE OUTLINE
140 MHz SAW Low-Loss Filter 12 MHz Bandwidth Part Number SF0140BA03071S
Units: mm
Pin Configuration: Input: 11 Input Return: 12 Output: 5 Output Return: 6 Ground: All other pins
MATCHING CIRCUIT
Ls1 Ls2
12 ponent values: Ls1 = 120 n H
Ls2 = 82 n H
(Minimum Q = 45)
Notes 1. Remended ponent tolerance: 5% 2. Optimum values may change depending on board layout. The values shown here are intended as a guide only. ISO 9001 Registered
Rev X5 21-Apr-05
Page 2 of 2
Integrated Circuit Systems
- Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA
- Phone...