SF0140BA03114S
SF0140BA03114S is Filter manufactured by IDT.
DESCRIPTION
- - 140 MHz SAW bandpass filter with 16 MHz bandwidth in 13.3x6.5mm SMP. Ro HS pliant.
TYPICAL PERFORMANCE S11
S22
Horizontal : Vertical (from top)
Frequency Magnitude Magnitude Phase Deviation Group Delay Deviation
5 10 1 10 200
MHz / div d B/div d B/div deg/div ns/div Input and Output Impedances Frequency Span : 100-180 MHz
Wide Band Response Frequency Span : 0-500 MHz Vertical Scale : 10 d B/div IDT
- SAW Products
- 324 Clark Street, Worcester, MA 01606, USA
- Ph 1-508-852-5400
- Fax 1-508-852-8456
.icst./saw.aspx
Rev X2 24-Nov-2005 Page 1 of 3
Micro Networks
A Division of Integrated Device Technology
140 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0140BA03114S
SPECIFICATION
Parameter Center Frequency (Fc) 1 Insertion Loss 2 1 d B Bandwidth 3 d B Bandwidth 35 d B Bandwidth Passband Ripple 3 Phase Deviation from Linear 3 Group Delay Variation 3 Absolute Delay Ultimate Rejection 4 Substrate Temperature Coefficient of Frequency Ambient Temperature System Source and Load Impedance
Notes:
Min
Typ
Max
Units
139.6 15 16
140 140.4 8.2 11 16.4 17.4 21.1 22 0.43 1 3 14 45 160 0.94 44 Lithium Niobate -90 25 50
MHz d B MHz MHz MHz d B p-p deg p-p ns p-p µs d B ppm/˚C ˚C Ω
1. Average of the lower and upper 3 d B frequencies. 2. Average level in the passband. 3. Evaluated over 80% of the 3d B bandwidth (i.e. FC±6.4 MHz). 4. Evaluated over the intervals 20
- 124 MHz and 156
- 280 MHz.
MAXIMUM RATINGS
Parameter Storage Temperature Range Input Power Level DC Voltage Between Each Terminal Min -40 Max +85 +17 15 Units ˚C d Bm V
MATCHING CIRCUIT 11
Input 50 Ω Source Single Ended
Output 50 Ω Load Single Ended
1,2,3,4,6, 7,8,9,10,12
Ls2 = 120 n H Cp2 = 0 p F (not used) ponent values (minimum inductor Q = 45): Ls1 = 100 n H Cp1 = 33 p...
