Datasheet4U Logo Datasheet4U.com

ILX485N - Slew-Rate-Limited RS-485/RS-422 Transceivers

Description

The ILX485 is low-power transceivers for RS-485 and RS- 422 communication.

IC contains one driver and one receiver.

The driver slew rates of the ILX485 is not limited, allowing them to transmit up to 10 Mbps.

Features

  • ILX485N ILX485D ILX485DT Low Quiescent Current: 300µA -7V to +12V Common-Mode Input Voltage Range Three-State Outputs 50ns Propagation Delays, 5ns Skew Full-Duplex and Half-Duplex Versions Available Operate from a Single 5V Supply Allows up to 32 Transceivers on the Bus Data rate: 10 Mbps Current-Limiting and Thermal Shutdown for Driver Overload Protection Enhanced ESD Specifications: ±15kV IEC61000-4-2 Air Discharge ±8kV IEC61000-4-2.

📥 Download Datasheet

Datasheet preview – ILX485N

Datasheet Details

Part number ILX485N
Manufacturer IK Semiconductor
File Size 465.62 KB
Description Slew-Rate-Limited RS-485/RS-422 Transceivers
Datasheet download datasheet ILX485N Datasheet
Additional preview pages of the ILX485N datasheet.

📁 Similar Datasheet

  • ILX103A - 3000-pixel CCD Linear Image Sensor (Sony)
  • ILX115LA - 5000-pixel X 3 line CCD Linear Sensor (Sony Corporation)
  • ILX128MA - 5350-pixel X 6-line CCD Linear Sensor (Sony Corporation)
  • ILX137K - 10700-pixel x 6-line CCD Linear Sensor (Sony)
  • ILX146K - The Industrys First Digital Copier CCD Linear Sensor (ETC)
  • ILX207DW - Interface IC of data serial transfer (Integral)
  • ILX3221EN - INTERFACE TRANSCEIVER OF THE SERIAL DATA OF THE STANDARD RS-232 (Integral)
  • ILX3221N - INTERFACE TRANSCEIVER OF THE SERIAL DATA OF THE STANDARD RS-232 (Integral)
  • ILX3226 - Transceiver (Integral)
  • ILX3226N - INTERFACE TRANSCEIVER OF THE SERIAL DATA OF THE STANDARD RS-232 (Integral)
Other Datasheets by IK Semiconductor
  • ILX485 - Drivers/Receiver
  • ILX485D - Slew-Rate-Limited RS-485/RS-422 Transceivers
  • ILX485DT - Slew-Rate-Limited RS-485/RS-422 Transceivers
  • ILX232 - Drivers/Receivers
  • ILX3085 - Interface Transceiver
  • ILX3221 - Interface Transceiver of the Serial Data of RS-232 Standard
  • ILX3221ESD - Interface Transceiver of the Serial Data of RS-232 Standard
  • ILX3221ESDT - Interface Transceiver of the Serial Data of RS-232 Standard

Full PDF Text Transcription

Click to expand full text
TECHNICAL DATA Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers Description The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver. The driver slew rates of the ILX485 is not limited, allowing them to transmit up to 10 Mbps. These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a highimpedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.
Published: |