IN74LV138 - 3-8 Decoder/Demultiplexer

Features

three enable inputs: two active LOW (CS2,CS3 and one active HIGH (CS1). Every output will be HIGH unless CS2, and CS3 are LOW and CS1 is HIGH.
Optimized for Low Voltage.

IK Semiconductor

Datasheet Details

Part number	IN74LV138
Manufacturer	IK Semiconductor
File Size	439.51 KB
Description	3-8 Decoder/Demultiplexer
Datasheet	IN74LV138 Datasheet
Additional preview pages of the IN74LV138 datasheet.

📁 Similar Datasheet

IN74LS07 - Hex Non-Inverted Buffers with Open- Collector Outputs (ETC)
IN74LS07D - Hex Non-Inverted Buffers with Open- Collector Outputs (ETC)
IN74LS07N - Hex Non-Inverted Buffers with Open- Collector Outputs (ETC)
IN74LS240AN - OCTAL BUFFER / DRIVER WITH 3-STATE OUTPUTS (ETC)
IN746A - Half Watt Zeners (Fairchild Semiconductor)
IN748 - GLASS ZENER DIODES (New Jersey Semi-Conductor)
IN74AC109 - Dual J-K Flip-Flop with Set and Reset High-Speed Silicon-Gate CMOS (ETC)
IN74AC244 - Octal 3-State Noninverting Buffer/Line Driver/Line Receiver High-Speed Silicon-Gate CMOS (Integral)
IN74AC245 - Octal 3-State Noninverting Bus Transceiver High-Speed Silicon-Gate CMOS (Integral)
IN74AC257 - Quad 2-Input Date Selector/Multiplexer with 3-State Outputs High-Speed Silicon-Gate CMOS (Integral)

Other Datasheets by IK Semiconductor

IN74LV139 - Dual 2-4 Decoder/Demultiplexer
IN74LV14 - Hex Schmitt-Trigger Inverter
IN74LV164 - 8-Bit Serial-In Parallel-Out Shift Register
IN74LV174 - Hex D-Type Flip-Flop
IN74LV00 - Quad 2-Input NAND Gate
IN74LV02 - Quad 2-Input NOR Gate
IN74LV04 - Hex Inverter
IN74LV08 - Quad 2-Input AND Gate

Full PDF Text Transcription

Click to expand full text

TECHNICAL DATA IN74LV138 3-to-8 line decoder/demultiplexer; inverting N SUFFIX PLASTIC The IN74LV138 is a low-voltage Si-gate CMOS device and is pin and function compatible 74HCT138. The74LV138 accepts three binary weighted address inputs (A0,A1,A2) and when enabled, provide 8 - mutually exclusive active LOW outputs (Y0 to Y7). The “138” features three enable inputs: two active LOW (CS2,CS3 and one active HIGH (CS1).Every output will be HIGH unless CS2, and CS3 are LOW and CS1 is HIGH. • • • • • • Optimized for Low Voltage applications:1.2 to 3.

Published: Dec 11, 2005 |