INN8186 Datasheet | INNOTECH

INNOTECH INN8186 vodasat@gmail. 13510327305 DS_V1p0_Revised_Nov_2012 Highly Integrated LNB Supply and Control Voltage Regulator For details, check for samples: Features - Low noise output to avoid sensitivity of Can Tuner and DISH’s LNA dropping down Noise <+/-40m V@300MHz BWL Noise <+/-20m V@20MHz BWL - Single chip power solution with 650m V Vpp 22KHz tone control signal transferred to output - LNB Voltages (2 levels: 14.3V and 19.3V) patible with mon standards - External 22KHz tone input - Integrated DC DC boost converter and high efficiency (typ. 93%) with integrated Power Mosfet - Integrated low Noise Linear Regulator - Integrated power switches and current sensing - Internal overcurrent and over temperature protection - Provides up to 450m A continuous load current - Output current limit of 500m A typical, with 48ms timer - Push-pull output stage minimizes 14  19V and 19V 14V output transition times - Internal Short Protection - Meet Di SEq C1.x protocol - 5.0V, 3.3V, 2.5V, 1.8V, 1.2 and 1.05V logic patible - 1.0MHz Switch Frequency BOOST - Highly Integrated with fewer external ponents Applications - LNB Power supply and control for Satellite Set-Top Box - Digital STB - Satellite TV cards Descriptions Intended for analog and digital satellite receivers/sat-TV, sat-OC cards, the INN8186 is a monolithic voltage regulator and interface IC, packaged in SOP8EP, specifically designed to provide the 14/19V power supply with high efficiency and the 22k Hz tone signaling to the LNB down-converter in the antenna dish or to the multi-switch box. INN8186 consists of a boost converter and a low-noise linear regulator along with the circuitry required for tone injection and pin controllable interface. The device makes the total LNB supply design simple, efficient and pact with low external ponent count The external modulation input (TONE pin) can accept a tome modulated Di SEq C mand and transfer it symmetrically to the output to meet Di SEq C...