Datasheet4U Logo Datasheet4U.com

ICM7245 - 8-Character 16-Segment Microprocessor Compatible LED Display Decoder Driver

General Description

SIGNAL D0 - D5 CS WR MODE PIN 4 thru 9 10 13 29 6-Bit ASCll Data input pins (active high).

Chip Select from µP address decoder, etc.

WRite pulse input pin (active low).

Key Features

  • Single supply +3.3V operation.
  • 16-Segment fonts with decimal point.
  • Up to 8 character display driver.
  • Has internal pull-up resistors of 136Ω Typical.
  • Microprocessor compatible.
  • Directly drives LED common cathode displays.
  • Cascadable without additional hardware.
  • Standby feature turns display off; puts chip in low power mode.
  • Sequential entry or random entry of data into display.
  • Character and segment driver.

📥 Download Datasheet

Datasheet Details

Part number ICM7245
Manufacturer Intersil (now Renesas)
File Size 456.33 KB
Description 8-Character 16-Segment Microprocessor Compatible LED Display Decoder Driver
Datasheet download datasheet ICM7245 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ICM7240 Fixed And Programmable Timer/Counters Maxim Integrated Products
ICM7242 Long Range Fixed Timer Intersil Corporation
ICM7242 Fixed And Programmable Timer/Counters Maxim Integrated Products
ICM7242 Long Range Fixed Timer Renesas
ICM7243 LED Display Decoder Driver Intersil Corporation

Other Datasheets by Intersil (now Renesas)

Part Number Description
ICM7207A CMOS Timebase Generator
ICM7209 Timebase Generator
ICM7217 4-Digit LED Display / Programmable Up/Down Counter
ICM7227 (ICM7217 / ICM7227) 4-Digit CMOS Up/Down Counter / Display Driver
ICM7038 CMOS Analog Quartz Clock Circuit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
8-Character, 16-Segment, Microprocessor Compatible, LED Display Decoder Driver ICM7245 The ICM7245 is an 8-character, alphanumeric display driver and controller which provides all the circuitry required to interface a microprocessor or digital system to a 16-segment display with internal pull-up resistors. It is primarily intended for use in microprocessor systems, where it minimizes hardware and software overhead. Incorporated on-chip are a 64-character ASClI decoder, 8x6 memory, high power character and segment drivers, and the multiplex scan circuitry. 6-bit ASCll data to be displayed is written into the memory directly from the microprocessor data bus. Data location depends upon the selection of either Sequential (MODE = 1) or Random access mode (MODE = 0).