International Rectifier IR2110C
The IR2110/IR2113 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction.| Part No. | IR2110C |
|---|---|
| Datasheet | IR2110C Download |
| Manufacturer |  International Rectifier |
| Description | High and Low Side Driver |
| Buy | Stock & Price |
FEATURES
● 100 % Tested at Probec● 3.3V logic compatible
● Available in Chip Pack, Unsawn Wafer, Sawn on Film d Separate logic supply range from 3.3V to 20V
● Floating channel designed for bootstrap operation Logic and power ground ±5V offset Fully operational to +500V or +600V
● CMOS Schmitt-triggered inputs with pull-down Tolerant to negative transient voltage
● Cycle by cycle edge-triggered shutdown logic dV/dt immune
● Matched propagation delay for both channels
● Gate drive supply range from 10 to 20V
● Outputs in phase with inputs
● Undervoltage lockout for both channels Typical Connection up to 500V or 600V HO VDD HIN SD LIN V SS VCC VDD HIN SD LIN VSS VCC COM LO VB VS TO LOAD (Refer to the Die Outlines for correct pin configuration). This/These diagram(s) show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout. ww.DataSheet4U.com Note: c This IR product is100% tested at wafer level and is manufactured using established, mature and well characterized processes.
