Datasheet4U Logo Datasheet4U.com

IS341W - Photocoupler

General Description

The IS341W Photocoupler is ideally suited for driving power IGBTs and MOSFETs used in inverters of motor control and of power supply system.

It contains an AlGaAs LED optically coupled to an integrated circuit with a power output stage.

Key Features

  • 3.0A Maximum Peak Output Current.
  • 2.5A Minimum Peak Output Current.
  • Rail-to-Rail Output Voltage.
  • 20kV/μs Minimum Common Mode Rejection at VCM 1500V.
  • Maximum Propagation Delay 200ns.
  • Maximum Propagation Delay Difference 100ns.
  • Wide Operating Voltage Range VCC 15 to 30 V.
  • Under Voltage Loc.

📥 Download Datasheet

Datasheet Details

Part number IS341W
Manufacturer ISOCOM
File Size 1.01 MB
Description Photocoupler
Datasheet download datasheet IS341W Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IS3403 P-Channel Enhancement Mode MOSFET FORESEE
IS3405 P-Channel Enhancement Mode MOSFET FORESEE
IS34C02 2K-bit 2-WIRE SERIAL CMOS EEPROM ISSI
IS34C02 2K-bit 2-WIRE SERIAL CMOS EEPROM ISSI
IS34C02B 2K-bit 2-WIRE SERIAL CMOS EEPROM ISSI

Other Datasheets by ISOCOM

Part Number Description
IS3020 OPTICALLY COUPLED BILATERAL SWITCH NON-ZERO CROSSING TRIAC
IS3021 OPTICALLY COUPLED BILATERAL SWITCH NON-ZERO CROSSING TRIAC
IS3022 OPTICALLY COUPLED BILATERAL SWITCH NON-ZERO CROSSING TRIAC
IS3051 Photocoupler
IS3052 Photocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ISOCOM COMPONENTS IS341W DESCRIPTION The IS341W Photocoupler is ideally suited for driving power IGBTs and MOSFETs used in inverters of motor control and of power supply system. It contains an AlGaAs LED optically coupled to an integrated circuit with a power output stage. The high peak output current of 3.0A is capable to direct drive IGBT with ratings up to 1200 V/100 A. For IGBTs with higher ratings, IS341W can be used to drive a discrete power stage which drives the IGBT gate. The device is supplied in Stretched SO6 package with wide lead separation. 1 Anode 2 NC 3 Cathode 4 GND (VEE) 5 VO 6 VCC A 0.1μF bypass Capacitor must be connected between Pins 6 and 4. FEATURES • 3.0A Maximum Peak Output Current • 2.