IS25CD512
IS25CD512 is 512Kbit / 1Mbit / 2Mbit Single Operating Voltage Serial Flash Memory manufactured by ISSI.
FEATURES
- Low Power Consumption Memory With 100 MHz Dual- Single Power Supply Operation
- Typical 10Memory m A active read current Output SPI Bus Interface With 100 MHz Dual- Low voltage range: 2.70 V
- 3.60 V (512Kbit / 1Mbit)
- Typical 15 m A program/erase current Output SPI Bus Interface 2.30 V
- 3.60 V (2Mbit)
- Memory Organization
- IS25CD512: 64K x 8 (512 Kbit)
- IS25CD010: 128K x 8 (1 Mbit)
- IS25LD020: 256K x 8 (2 Mbit)
- Cost Effective Sector/Block Architecture
- 512Kb : Uniform 4KByte sectors / Two uniform 32KByte blocks
- 1Mb : Uniform 4KByte sectors / Four uniform 32KByte blocks
- 2Mb : Uniform 4KByte sectors / Four uniform 64KByte blocks
- Low standby current 1u A (Typ)
- Serial Peripheral Interface (SPI) patible
- Supports single- or dual-output
- Supports SPI Modes 0 and 3
- Maximum 33 MHz clock rate for normal read
- Maximum 100 MHz clock rate for fast read
- Page Program (up to 256 Bytes) Operation
- Typical 2 ms per page program
- Sector, Block or Chip Erase Operation
- Maximum 10 ms sector, block or chip erase
- Hardware Write Protection
- Protect and unprotect the device from write operation by Write Protect (WP#) Pin
- Software Write Protection
- The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only
- High Product Endurance
- Guaranteed 200,000 program/erase cycles per single sector
- Minimum 20 years data retention
- Industrial Standard Pin-out and Package
- 8-pin SOIC 150mil
- 8-pin VVSOP 150mil (2Mb)
- 8-pin USON (2x3 mm) (512Kb)
- 8-pin WSON (5x6 mm)
- 8-pin TSSOP
- KGD (Call Factory)
- Lead-free (Pb-free) package
- Automotive Temperature Ranges...
