IS25LP256
IS25LP256 is 256MBIT SERIAL FLASH MEMORY manufactured by ISSI.
FEATURES
- Industry Standard Serial Interface
- IS25LP256: 256Mbit/32Mbyte
- 3 or 4 Byte Addressing Mode
- Supports Standard SPI, Fast, Dual, Dual I/O, Quad, Quad I/O, SPI DTR, Dual I/O DTR, Quad I/O DTR, and QPI
- Software & Hardware Reset
- Supports Serial Flash Discoverable Parameters (SFDP)
- High Performance Serial Flash (SPI)
- 80MHz Normal Read
- Up to166Mhz Fast Read
- Up to 80MHz DTR (Dual Transfer Rate)
- Equivalent Throughput of 664 Mb/s
- Selectable Dummy Cycles
- Configurable Drive Strength
- Supports SPI Modes 0 and 3
- More than 100,000 Erase/Program Cycles
- More than 20-year Data Retention
- Flexible & Efficient Memory Architecture
- Chip Erase with Uniform: Sector/Block Erase (4/32/64 Kbyte)
- Program 1 to 256 Byte per Page
- Program/Erase Suspend & Resume
- Efficient Read and Program modes
- Low Instruction Overhead Operations
- Continuous Read 8/16/32/64 Byte Burst
- Selectable Burst Length
- QPI for Reduced Instruction Overhead
- Auto Boot operation
- Low Power with Wide Temp. Ranges
- Single 2.30V to 3.60V Voltage Supply
- 10 m A Active Read Current
- 8 µA Standby Current
- 1 µA Deep Power Down
- Temp Grades: Extended: -40°C to +105°C Extended+: -40°C to +125°C Auto Grade: up to +125°C
Note: Extended+ should not be used for Automotive
- Advanced Security Protection
- Software and Hardware Write Protection
- Advanced Sector Protection
- Top/Bottom Block protection and plement
- Individual Block/Sector unlock
- Power Supply Lock...
