Datasheet4U Logo Datasheet4U.com

IS32FL3738 - 6 x 8 DOTS MATRIX LED DRIVER

General Description

The IS32FL3738 is a general purpose 6×8 LEDs matrix driver with 1/12 cycle rate.

The device can be programmed via an I2C compatible interface.

Each LED can be dimmed individually with 8-bit × 4 PWM data which allowing 512 steps of linear dimming.

Key Features

  • 3 Auto Breathing Modes which are noted as ABM-1, ABM-2 and ABM-3. For each Auto Breathing Mode, there are 4 timing characters which include current rising / holding / falling / off time and 3 loop characters which include Loop-Beginning / Loop-Ending / Loop-Times. Every LED can be configured to be any Auto Breathing Mode or NoBreathing Mode individually. Additionally each LED open and short state can be detected, IS32FL3738 store the open or short information in Open-Short Registers. The Open-Sh.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IS32FL3726A 16-CHANNEL LED DRIVER Lumissil
IS32FL3740 3x4 DOTS MATRIX LED DRIVER Lumissil
IS32FL3746B 18x4 DOTS MATRIX LED DRIVER Lumissil
IS32FL3761 33x12 DOTS MATRIX LED DRIVER Lumissil
IS32FL3202 SMART LED CONTROLLER Lumissil

Other Datasheets by ISSI (now Infineon)

Part Number Description
IS32BL3552 BOOST TYPE LED DRIVER
IS32BL3554 BOOST TYPE LED DRIVER
IS32LT3117 4-CHANNEL CONSTANT CURRENT REGULATOR
IS32LT3120 LINEAR LED DRIVER
IS32LT3175N SINGLE CHANNEL LINEAR LED DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IS32FL3738 6×8 DOTS MATRIX LED DRIVER WITH INDIVIDUAL AUTO BREATH FUNCTION May 2018 GENERAL DESCRIPTION The IS32FL3738 is a general purpose 6×8 LEDs matrix driver with 1/12 cycle rate. The device can be programmed via an I2C compatible interface. Each LED can be dimmed individually with 8-bit × 4 PWM data which allowing 512 steps of linear dimming. IS32FL3738 features 3 Auto Breathing Modes which are noted as ABM-1, ABM-2 and ABM-3. For each Auto Breathing Mode, there are 4 timing characters which include current rising / holding / falling / off time and 3 loop characters which include Loop-Beginning / Loop-Ending / Loop-Times. Every LED can be configured to be any Auto Breathing Mode or NoBreathing Mode individually.