IS32LT3175P Overview
The IS32LT3175 is a single channel linear programmable current regulator capable of up to 150mA. It integrates a debounce and latch circuit on the channel enable pin (EN) to facilitate the use of a low cost momentary contact switch. The PWM pin can be interfaced to a logic level “courtesy light” signal to directly drive the LED channel.
IS32LT3175P Key Features
- Operating voltage 5V to 42V
- Single channel current source
- Programmable current via a single external resistor
- Configurable from 20mA to 150mA
- Momentary contact button EN input
- Input is debounced and latched
- Higher priority than PWM input
- Gamma corrected Fade In/Out algorithm
- Pull down resistors set independent fade IN and OUT ramp time
- PWM input pin driven by external PWM source
