CCM01 Datasheet | ITT Industries

.. CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch unsealed. These connectors are intended for applications where the card usage is relatively low and the environment is benign. Features - Available with 8 through hole contacts. - A normally closed blade switch detects when the card is fully inserted. - Snap in boardlocks hold the connector in place prior to soldering. Construction Contacts Plating Moldings Card detection switch Mechanical Data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration Shock 8 10,000 cycles min 10 N max 1 N min / 10N max 0.20 N min / 0.60 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0.35 mm (0.014) Max electrical discontinuity 1µs Peak value 500 m/s2 - Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Copper alloy Contact area : Gold over nickel Terminals : Tin lead (2µ min) Thermoplastic UL 94V-0 rated Copper alloy Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Environmental Data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch Ordering Code Part Number CCM01-1NF Number of Contacts 8 Packaging Multiple 200 -40°C to +85°C Wave : 260°C / 5 sec IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Not sealed blade switch Normally closed 100 mΩ max 250 Vrms min 1 m A min /10 m A max 0.2 VA 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Packaging 20 per tray, 10 trays per box. Dimensions are shown in mm Dimensions subject to change .ittcannon. Data Sheet 4 U . .. CCM01 MK I Dimensional Drawings CCM01-1NF A-A 6,5 Card stop 0,9±0,25 15,4 19,05 50,3 (REF.) B 19,05 40 (REF.) A 4,0 2,0 6,5 62 ±0,2...