IXDF404 Datasheet | IXYS

IXDN404 / IXDI404 / IXDF404 4 Ampere Dual Low-Side Ultrafast MOSFET Drivers Features - Built using the advantages and patibility of CMOS and IXYS HDMOSTM processes - Latch-Up Protected up to 0.5A - High Peak Output Current: 4A Peak - Wide Operating Range: 4.5V to 35V - High Capacitive Load Drive Capability: 1800p F in <15ns - Matched Rise And Fall Times - Low Propagation Delay Time .. - Low Output Impedance - Low Supply Current - Two Drivers in Single Chip General Description The IXDN404/IXDI404/IXDF404 is prised of two 4 Ampere CMOS high speed MOSFET drivers. Each output can source and sink 4A of peak current while producing voltage rise and fall times of less than 15ns to drive the latest IXYS MOSFETs and IGBT's. The input of the driver is patible with TTL or CMOS and is fully immune to latch up over the entire operating range. A patent-pending circuit virtually eliminates CMOS power supply cross conduction and current shoot-through. Improved speed and drive capabilities are further enhanced by very low, matched rise and fall times. The IXDN404 is configured as a dual non-inverting gate driver, the IXDI404 is a dual inverting gate driver, and the IXDF404 is a dual inverting + non-inverting gate driver. The IXDN404/IXDI404/IXDF404 family are available in the standard 8 pin P-DIP (PI), SOIC-8 (SIA) and SOIC-16 (SIA-16) packages. For enhanced thermal performance, the SOP-8 and SOP-16 are also available in a package with an exposed grounded metal back as the SI and SI-16 repectively. Applications - - - - - - - - - - Driving MOSFETs and IGBTs Motor Controls Line Drivers Pulse Generators Local Power ON/OFF Switch Switch Mode Power Supplies (SMPS) DC to DC Converters Pulse Transformer Driver Class D Switching Amplifiers Limiting di/dt Under Short Circuit Ordering Information Part Number IXDN404PI IXDN404SI IXDN404SIA IXDN404SI-16 IXDN404SIA-16 IXDI404PI IXDI404SI IXDI404SIA IXDI404SI-16 IXDI404SIA-16 IXDF404PI IXDF404SI IXDF404SIA...