CPC1998
CPC1998 is AC Power Switch manufactured by IXYS.
Features
- Load Current up to 20Arms with 5°C/W Heat Sink
- 800VP Blocking Voltage
- 5m A Control Current
- Zero-Cross Switching
- Isolated, Low Thermal Impedance Ceramic Pad for
Heat Sink Applications
- 2500Vrms Isolation, Input to Output
- DC Control, AC Output
- Optically Isolated
- TTL and CMOS patible
- Low EMI and RFI Generation
- High Noise Immunity
- Machine Insertable, Wave Solderable
Applications
- Programmable Control
- Process Control
- Power Control Panels
- Remote Switching
- Gas Pump Electronics
- Contactors
- Large Relays
- Solenoids
- Motors
- Heaters
Approvals
- UL 508 Recognized ponent: File E69938
AC Power Switch
Description
CPC1998J is an AC Solid State Switch utilizing dual power SCR outputs. This device also includes zero-cross turn-on circuitry and is specified with an 800VP blocking voltage.
Tightly controlled zero-cross circuitry ensures low noise switching of AC loads by minimizing the generation of transients. The optically coupled input and output circuits provide exceptional noise immunity and 2500Vrms of isolation between the control and the output. As a result, the CPC1998 is well suited for industrial environments where electromagnetic interference would disrupt the operation of plant facility munications and control systems.
The unique i4-PAC package pioneered by IXYS allows Solid State Relays to achieve the highest load current and power ratings. This package features a unique IXYS process in which the silicon chips are soft soldered onto the Direct Copper Bond (DCB) substrate instead of the traditional copper leadframe. The DCB ceramic, the same substrate used in high power modules, not only provides 2500Vrms isolation but also very low junction-to-case thermal resistance (0.35 °C/W).
Ordering Information
Part CPC1998J
Description i4-PAC Package (25 per tube)
Pin Configuration
12 AC Load
34 + LED
-...
