CPC7695 Datasheet | IXYS

Features - Improved switch d V/dt immunity of 1500V/s - Drop-In Replacement for CPC7595 - Replaces CPC7585, and allows removal of power-up control discrete ponents - Enhanced Ringing Test Switch, SW8, breakdown voltage - TTL logic level inputs for 3.3V logic interfaces - Smart logic for power-up / hot-plug state control - Small 20-pin or 28-pin SOIC Package - Monolithic IC reliability - Low, matched, RON - Eliminates the need for zero-cross switching - Flexible switch timing for transition from Ringing mode to Talk mode. - Clean, bounce-free switching - SLIC tertiary protection via integrated current limiting, voltage clamping, and thermal shutdown - 5V operation with power consumption <10.5 m W - Intelligent battery monitor Applications - Standard voice linecards - Integrated Voice and Data (IVD) linecards - Central office (CO) - Digital Loop Carrier (DLC) - PBX Systems - Digitally Added Main Line (DAML) - Fiber in the Loop (FITL) - Pair Gain System - Channel Banks Description The CPC7695 is a member of IXYS Integrated Circuits Division’s third-generation Line Card Access Switch (LCAS) family. This monolithic 10-pole line card access switch is available in a 20-pin or 28-pin SOIC package. It provides the necessary functions to replace three 2-Form-C electromechanical relays on analog line cards or bined voice and data line cards found in central office, access, and PBX equipment. The device contains solid state switches for tip and ring line break, ringing injection, and test access. The CPC7695 requires only a +5V supply and provides stable start-up conditioning during system power-up and for hot-plug insertion. Once active, the inputs respond to traditional TTL logic levels, enabling the CPC7695 to be used with 3.3V-only logic. Ordering Information CPC7695 part numbers are specified as shown here: B - 28-pin SOIC delivered 29/Tube, 1000/Reel Z - 20-pin SOIC delivered 40/Tube, 1000/Reel CPC7695 x x xx - Add for Tape & Reel Version - With Protection SCR B -...