IX2127 Datasheet | IXYS

Features - Floating Channel Designed for Bootstrap Operation up to 600V - Tolerant to Negative Transient Voltages; d V/dt Immune - Undervoltage Lockout - 3.3V, 5V, and 12V Input Logic patible - Open-Drain FAULT Indicator Pin Shows Over-Current Shutdown - Output in Phase with the Input Applications - High-Speed Gate Driver - Motor Drive Inverter Pb e3 IX2127 Block Diagram Description The IX2127 is a high-voltage, high-speed power MOSFET and IGBT driver. High-voltage level-shift circuitry enables this device to operate up to 600V. IXYS Integrated Circuits Division’s proprietary mon-mode design techniques provide stable operation in high d V/dt noise environments. An on-board parator can be used to detect an over-current condition in the driven MOSFET or IGBT device, and then shut down drive to that device. An open-drain output, FAULT, indicates that an over-current shutdown has occurred. The gate driver output typically can source 250m A and sink 500m A, which is suitable for fluorescent lamp ballast, motor control, SMPS, and other converter drive topologies. The IX2127 is provided in 8-pin DIP and 8-pin SOIC packages, and is available in Tape & Reel versions. See ordering information below. Ordering Information Part IX2127G IX2127N IX2127NTR Description 8-Pin DIP (50/Tube) 8-Pin SOIC (100/Tube) 8-Pin SOIC (2000/Reel) VCC IN FAULT VCC Low Side High Side Data Latch Enable Transmitter Low-High Level Shift Receiver Undervoltage Lockout Buffer Blanking Signal Delay QR S Receiver High-Low Level Shift Transmitter Enable Data Latch + _ parator VB HO...