IXRFD615X2 Datasheet PDF (15A Dual Low-Side RF MOSFET Driver)

IXRFD615X2 - 15A Dual Low-Side RF MOSFET Driver

Description

The IXRFD615X2 is a dual CMOS high-speed, high-current gate driver specifically designed to drive MOSFETs in PushPull and Class E Push-Pull HF RF applications as well as other applications requiring ultrafast rise and fall times or short minimum pulse widths.

Features

and wide safety margin in operating voltage and power make the IXRFD615X2 unmatched in performance and value. The surface mount IXRFD615X2 is packaged in a lowinductance RF package incorporating advanced layout techniques to minimize stray lead inductances for optimum switching performance. The two drivers are constructed on a single substrate sharing a common ground via the substrate and therefore are not capable of ground isolated operation from each other. An example would be a half-bridge wh.

Datasheet Details

Part number	IXRFD615X2
Manufacturer	IXYS (now Littelfuse)
File Size	675.35 KB
Description	15A Dual Low-Side RF MOSFET Driver
Datasheet	IXRFD615X2 Datasheet
Additional preview pages of the IXRFD615X2 datasheet.

📁 Similar Datasheet

IXR100 - Isolated / Self-Powered / Temperature Sensor Conditioning 4-20mA TWO-WIRE TRANSMITTER (Burr-Brown Corporation)

IXRH40N120 - Power Discretes/IGBTs/Reverse Blocking Series (IXYS Corporation)

IXRH50N100 - IGBT with Reverse Blocking capability (IXYS Corporation)

IXRH50N120 - IGBT with Reverse Blocking capability (IXYS Corporation)

IXRH50N60 - IGBT with Reverse Blocking capability (IXYS Corporation)

IXRH50N80 - IGBT with Reverse Blocking capability (IXYS Corporation)

Full PDF Text Transcription

Click to expand full text

15 A Dual Low-Side RF MOSFET Driver IXRFD615X2 Description The IXRFD615X2 is a dual CMOS high-speed, high-current gate driver specifically designed to drive MOSFETs in PushPull and Class E Push-Pull HF RF applications as well as other applications requiring ultrafast rise and fall times or short minimum pulse widths. The IXRFD615X2 can source and sink 15 A of peak current per driver while producing voltage rise and fall times of less than 10 ns and minimum pulse widths of 8 ns. The inputs to the driver are compatible with TTL or CMOS and are fully immune to latch up over the entire operating range. Designed with small internal delays, cross conduction or current shoot-through is virtually eliminated.

Published: Feb 1, 2016 |