AMC-100 Datasheet | Indelac

The Indelac AMC-100/AMC-101 AC Motor Controllers are used for proportional positioning of split phase AC actuator motors. An external mand signal of 0-10V, 1-5V, or 4-20m A can be used to pare to a feedback signal from a potentiometer. The open or closed AC output will energize, which powers the actuator motor, until the feedback signal matches the mand signal, at which time the controller's AC output is turned off and the actuator motor stops. With a loss of mand signal in the 1-5V or the 4-20m A input range, the AMC-100/ AMC-101 offers three useful options: fail in place, the open output on, or the closed output on. All input and output options are easily field configurable with jumper plugs. The only other ad-justments consist of Deadband and non-interactive Zero and Span trimmers, which allows for easy field calibra-tion. These controllers are available in versions for 117VAC ±10%, 234VAC ±10%, or 24VAC ±10% power and give the user optical isolation between the input signal and the AC outputs. The unit includes a red LED indica-tor (for the open output), a green LED indicator (for the closed output), an on-board fuse, and two removable screw terminal strips (for easy servicing). The AMC-100 (117VAC), AMC-100B (234 VAC), and AMC-100D(24VAC) are mounted on Snaptrack and deliver 2A at 60°C. Subsequently, the AMC-101 (117 VAC), AMC-101B (234VAC), and AMC-101D (24VAC) are mounted on an aluminum extrusion and can deliver 5A at 60°C. All six versions are available with standoff mounts only (insulating sheet is included) which allows the units to be mounted directly to the actuator housing or bracket. Note, the housing or bracket is re-quired for heatsinking the AMC-101A, AMC-101C, and AMC-101E 5A units. AMC-100 AMC-101 AC Motor Controllers AMC-100 AMC-100B AMC-100D 2 3 4 5 6 1 2 3 4 5 6 7 8 AMC-101 AMC-101B AMC-101D 3 4 5 6 1 2 3 4 7 8 AMC-100A AMC-100C AMC-100E AMC-101A AMC-101C AMC-101E 2 3 4 5 6 1 2 3 4 5 6 7 8 ADDITIONAL...