PBA31302
PBA31302 is Bluetooth Radio Transceiver manufactured by Infineon.
Features
- RF output power class 1
- pliant with Bluetooth specification 1.1
- Forms a plete radio with only
- an antenna
- a 10- 20 MHz reference frequency
- On board output power control
- Small outline LGA-package (11.8×11.8×1.6 mm)
- Requires no external shielding
- Requires no external RF design Applications
- Access points
- Modems
- puters
- Mobile phones
Note: The Bluetooth trademarks are owned by Bluetooth SIG, Inc. and used by Infineon Technologies under license. .infineon./bluetooth
3 1 3
0 2 / 1
R a d i o Tr a n s c e i v e r
N e v e r s t o p t h i n k i n g .
P R O D U C T
B R I E F
Key data
Parameter Frequency range Reference clock frequency Receiver sensitivity level Output power Supply Voltage VCC Supply Voltage VCC_PA Maximum Temperature range Min 2.402 10 -86 2.65 2.7 -30 17 2.8 3.2 20 3.0 5.5 +75 Typ Max 2.480 20 Unit GHz MHz d Bm d B V V °C
Hardware PBA 313 02 is a long-range microwave frequency radio transceiver for Bluetooth munication links that are designed to operate in the globally available unlicensed ISM frequency band, 2.4- 2.5 GHz. Fast frequency hopping (1600 channel hops/s) with 79 channels (2.402 to 2.480 GHz) and a maximum TX & RX bit rate of 1 Mbit/s. The implemented modulation technique is Gaussian Frequency Shift Keying (GFSK) with a BT product of 0.5. The channel bandwidth is 1 MHz and the frequency deviation is between 140 and 175 k Hz. The Bluetooth Radio is built around a Bi CMOS ASIC. Antenna filter, RX and TX baluns are all integrated into the ceramic carrier.
Operating from a 2.8 V supply voltage, the device has a typical supply current requirement of only 60 m A (receive mode) or 150 m A (transmit mode), thus helping to extend battery life for portable equipment. A standby mode provides further power savings....
