TLE5205-2 Datasheet | Infineon

5-A H-Bridge for DC-Motor Applications TLE 5205-2 1 Overview 1.1 Features - Delivers up to 5 A continuous 6 A peak current - Optimized for DC motor management applications - Operates at supply voltages up to 40 V - Very low RDS ON; typ. 200 mΩ @ 25 °C per switch - Output full short circuit protected - Overtemperature protection with hysteresis and diagnosis - Short circuit and open load diagnosis with open drain error flag - Undervoltage lockout - CMOS/TTL patible inputs with hysteresis - No crossover current - Internal freewheeling diodes - Wide temperature range; - 40 °C < Tj < 150 °C - Green Product (Ro HS pliant) - AEC Qualified Type TLE 5205-2 TLE 5205-2GP TLE 5205-2G TLE 5205-2S Package PG-TO220-7-11 PG-DSO-20-37 PG-TO263-7-1 PG-TO220-7-12 PG-TO220-7-11 PG-DSO-20-37 PG-TO263-7-1 Description PG-TO220-7-12 The TLE 5205-2 is an integrated power H-bridge with DMOS output stages for driving DC-Motors. The part is built using the Infineon multi-technology process SPT® which allows bipolar and CMOS control circuitry plus DMOS power devices to exist on the same monolithic structure. Operation modes forward (cw), reverse (ccw), brake and high impedance are invoked from just two control pins with TTL/CMOS patible levels. The bination of an extremely low RDS ON and the use of a power IC package with low thermal resistance and high thermal capacity helps to minimize system power dissipation. A blocking capacitor at the supply voltage is the only external circuitry due to the integrated freewheeling diodes. Data Sheet 1 Rev. 1.1, 2007-07-31 1.2 Pin Configuration (top view) TLE 5205-2 TLE...