TLE6255G Datasheet | Infineon

Features Single wire transceiver for up to 33 k Bit/s bus speed patibel to GM LAN Standard GMW 3089 - V1.26 Excellent EMC performance High speed mode for up to 100 k Bit/s bus speed Ambient operation range - 40 °C to 125 °C Supply voltage operation range 5.5 V to 28 V Typ. 30 µA total current consumption in sleep mode 4 k V ESD protection Short circuit and overtemperature protected Input bilevel feature for wake-up detection Output bilevel feature for wake up call Loss of Ground protection Bus dominant timeout feature Programmable slewrate Ordering Code Q67006-A9352 TLE 6255 G P-DSO-14-8; -9 Type TLE 6255 G 2 Description Package P-DSO-14-9 (SMD) The TLE 6255 G is a special featured low speed transceiver for use in single wire applications. The device is primarily designed for use in single wire CAN systems operating with various CSMA/CR (carrier sense multiple access/collision resolution) protocols such as the BOSCH Controller Area Network (CAN). The normal munication bitrate in CAN-systems is up to 33 k Bit/s. For software or diagnostic data download a high speed mode is offered that allows transmission rates up to 100 k Bit/s. With many integrated features such as slewrate controlled output, loss of ground circuit, bi-level wake-up and sleep mode for low power consumption the TLE 6255 G is optimized for use in automotive applications. The device is based on Smart Power Technology SPT® which allows bipolar and CMOS control circuitry to be integrated with DMOS power devices on the same monolithic circuitry. Additional features like short circuit and overtemperature protection, over- and undervoltage lockout are integrated. To enhance the reliability and robustness of the TLE 6255 G the enhanced power SO-14 package is used in order to provide high thermal capacity and low thermal resistance. Data Sheet Rev. 2.5 1 2003-11-27 TLE 6255 G Pin Configuration (top view) Tx D Leadframe N.C. M0 CANH M1 Chip LOAD Rx...