TLE6262G Datasheet | Infineon

Fault Tolerant CAN - LDO Final Data Sheet 1 1.1 Overview Features TLE 6262 G - Standard fault tolerant differential CAN-transceiver (TLE6254 LS CAN cell) - Bus failure management - Low power mode management - CAN data transmission rate up to 125 k Baud - Low-dropout voltage regulator 5V ± 2% - Two Low Side Switches - Three High Side Switches - Power on and under-voltage reset generator - Vcc supervisor - Window watchdog - Programable time base - Integrated fail-safe mechanism - Standard 16 bit SPI-Interface - Wide input voltage and temperature range - Enhanced power P-DSO-Package Type TLE 6262 G Ordering Code on request P-DSO-28-6 Enhanced Power Package P-DSO-28-6 Description The TLE 6262 G is a monolithic integrated circuit in a P-DSO-28-6 package, which incorporates a failure tolerant low speed CAN-transceiver for differential mode data transmission, a low dropout voltage regulator for internal and external 5V supply as well as a 16 bit SPI interface to control and monitor the IC. Further there are integrated three high side switches, two low side switches, a window watchdog circuit and a reset circuit. Both, the window watchdog and reset function are referring to a time base that is programmable via an external resistor. The IC is designed to withstand the severe conditions of automotive applications. 1 version: 2.03 date: 2002-03-20 Final Data TLE 6262 G Pin Configuration (top view) CANH 1 RTH 2 RO 3 CANL 4 RTL 5 GND 6 GND 7 GND 8 GND 9 OUTH1 10 OUTL1 11 OUTL2 12 OUTH2 13 OUTH3 14 28 OSC 27 PWM 26 Tx D 25 Rx D 24 Vcc 23 GND 22 GND 21 GND 20 GND 19 CLK 18 DI 17 DO 16 CSN 15 Vs P-DSO-28-6 (enhanced power...