ICE3AR2280JZ
Key Features
- Auto Restart protection for over load, over temperature, over voltage and external protection enable function
- Pb-free lead plating; RoHS compliant PG-DIP7 Features * * * * * * * * * * * * *
- 800V avalanche rugged CoolMOS® with Startup Cell Description Active Burst Mode for lowest Standby Power The ICE3AR2280JZ (CoolSET®-F3R80) is an enhanced Selectable entry and exit burst mode level 800V MOSFET version of ICE3BRxx65J (CoolSET®-F3R 100kHz internally fixed switching frequency with 650V) in DIP-7 package. The PWM controller is based on jittering feature F3R 650V with some new and enhanced features. In Auto Restart Protection for Over load, Open Loop, particular it is a device running at 100KHz, implemented VCC Under voltage & Over voltage and Over with brownout features, installing 800V CoolMOS® with temperature startup cell and packaged into DIP-7. It targets for the low External auto-restart enable pin power SMPS with increased MOSFET voltage margin Over temperature protection with 50°C hysteresis requirement such as Off-Line battery adapters, DVD R/W, Built-in 10ms Soft Start DVD Combi, Blue ray, set top box, auxiliary power supply Built-in 20ms and extendable blanking time for short for PC and server, etc. In summary, the CoolSET® F3R80 duration peak power provides good voltage margin of MOSFET, lowest Propagation delay compensation for both maximum standby power, selectable burst level, reduced output load and burst mode ripple during burst mode, reliable output with brownout Adjustable brownout feature feature, accurate maximum power control for both Overall tolerance of Current Limiting < ±5% maximum power and burst power, low EMI with frequency BiCMOS technology for low power consumption and jittering and soft gate drive, built-in and flexible wide VCC voltage range protections, etc. Therefore, CoolSET® F3R80 is a Soft gate drive with 50W turn on resistor
