TLE4267 Datasheet | Infineon

Features - Output voltage tolerance ≤ ±2% - 400 m A output current capability - Low-drop voltage - Very low standby current consumption - Input voltage up to 40 V - Overvoltage protection up to 60 V (≤ 400 ms) - Reset function down to 1 V output voltage - ESD protection up to 2000 V - Adjustable reset time - On/off logic - Overtemperature protection - Reverse polarity protection - Short-circuit proof - Wide temperature range - Suitable for use in automotive electronics - Green Product (Ro HS pliant) - AEC Qualified Functional Description TLE 4267 is a 5-V low drop voltage regulator for automotive applications in the PG-TO220-7 or PG-DSO-14-30 package. It supplies an output current of > 400 m A. The IC is shortcircuit-proof and has an overtemperature protection circuit. P-TO220-7-3 P-TO 220-7-180 (TO-220 AB/7, Option E3180) P-TO220-7-230 P-DSO-14-3, -8, -9, -11, 14 Type TLE 4267 TLE 4267 G Data Sheet Package PG-TO220-7-11 PG-TO263-7-1 Type TLE 4267 S TLE 4267 GM Package PG-TO220-7-12 PG-DSO-14-30 Rev. 2.51, 2012-01-20 TLE 4267 Application The IC regulates an input voltage VI in the range of 5.5 V < VI < 40 V to a nominal output voltage of VQ = 5.0 V. A reset signal is generated for an output voltage of VQ < VRT (typ. 4.5 V). The reset delay can be set with an external capacitor. The device has two logic inputs. A voltage of VE2 > 4.0 V given to the E2-pin (e.g. by ignition) turns the device on. Depending on the voltage on pin E6 the IC may be hold in active-state even if VE2 goes to low level. This makes it simple to implement a self-holding circuit without external ponents. When the device is turned off, the output voltage drops to 0 V and current consumption tends towards 0 μA. Design Notes for External ponents The input capacitor CI is necessary for pensation of line influences. The resonant circuit consisting of lead inductance and input capacitance can be damped by a resistor of approx. 1 Ω in series with CI. The output capacitor is necessary for the...