TLE4309 Datasheet | Infineon

Adjustable Linear Low Dropout LED Driver Features - - - - - - - - - - - - Adjustable constant current up to 500 m A Operating supply voltage range 4.5 V to 24 V Maximum supply voltage up to 45 V Low dropout voltage PWM / ENABLE input << 1 µA quiescent current when disabled Overtemperature protection Short circuit proof Reverse polarity protection Operating junction temperature range: -40 °C to 150 °C Suitable for applications up to 85 °C ambient temperature. Green Product (Ro HS pliant) PG-TO263-7 Functional Description The TLE4309 is an integrated adjustable constant current source for driving loads up to 500 m A. The output current level can be adjusted with an external shunt resistor. Supplying high power LEDs with the TLE4309 ensures constant brightness independent from supply voltage or LED forward voltage spread. Therefore, LED lifetime is extended by protecting from overcurrent and overtemperature The PWM/EN input permits LED brightness regulation by pulse width modulation. Setting the pin to “low” switches off the IC entirely. Due to the high impedance of the PWM/EN input, the TLE4309 can be used as a protected high side switch. Protection circuits prevent from damage to the IC in case of overload, short circuit, and reverse polarity. A chip temperature monitoring circuit shuts off the power stage and prevents the IC from destruction under fault conditions. In case of negative input voltage, a leakage current is flowing only from the output to the input, hence the LED are protected against reverse supply. Input voltage peaks up to 45 V are absorbed by the IC, preventing the LEDs from overcurrent. The TLE4309G .. is provided in the surface mounted PG-TO-263 package with excellent thermal resistance. Package PG-TO263-7-1 Type TLE4309G Marking TLE4309 Rev. 1.0, 2007-03-20 Circuit Description An external shunt resistor in the ground path of the connected LEDs senses the LED current. A regulation loop...