BGS12WN6 Datasheet | Infineon

Features - Frequency range from 0.05 to 9 GHz - Small size 0.7 × 1.1 mm2 and ultra-low profile of 0.375 mm height max - Fast switching speed - Low insertion loss and high port to port isolation up to 9 GHz - RF input power up to 30 d Bm power - Low current consumption - No DC blocking capacitors required if no DC applied on RF lines - Ro HS and WEEE pliant package Potential applications Antenna selection and switching of transmit signals (Tx/Rx) in - IEEE 802.11a/b/g/n/ac/ax WLAN Networks - Bluetooth (up to 6.0) - Ultra-Wide-Band (UWB IEEE 802.15.4) - Cellular applications (up to 6G) Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Description The BGS12WN6 is a broadband SPDT RF switch suitable for various wireless systems, including Wi Fi BT, UWB, and cellular. Its high linearity performance and low insertion loss make it an ideal choice for switching transmit signals, e.g., as Tx Rx switch or as antenna diversity switch. The integrated on-chip CMOS logic allows direct connection to a digital control pin, eliminating the need for extra interface circuitry, thereby simplifying system design, and reducing ponent count. The isolated port is a reflective short. The device’s flexible voltage supply and control enable easy adaptation to diverse applications and use cases. The BGS12WN6 is fabricated using Infineon’s proprietary RF CMOS technology. Housed in a miniature package, this device is particularly well-suited for applications where PCB space is critical, allowing for optimal utilization of available board real estate. Type BGS12WN6 Marking K Package PG-TSNP-6-10 PG-TSNP-6-2 Ordering Information BGS 12WN6 E6327 BGS 12WN6 E6329 Please read the sections "Important notice" and "Warnings" at the end of this document .infineon. Revision 2.8 2024-11-19 0.05- 9 GHz SPDT switch with fast switching speed Block diagram Revision 2.8 2024-11-19 0.05- 9 GHz SPDT switch with...