BGSA200ML9 Datasheet | Infineon

SP005728941 Two throws low resistance antenna tuning switch Features - Low RON resistance of 1.4 Ω at each port in ON state - Low COFF capacitance of 157 f F at each port in OFF state - High RF operating peak voltage handling of 50 V in OFF state - Low harmonic generation - MIPI RFFE 2.1 control interface - Support of MIPI and GPIO control modes - 1.8V and 1.2V VIO operation - Extremely low current consumption of 22 µA - Switching speed <5 µs - Self-resonant frequency >8250 MHz - Small form factor 1.1 mm x 1.1 mm (MSL1, 260 °C per JEDEC J-STD-020) Potential applications - Impedance, antenna and Inductance tuning - Tunable filters Description The BGSA200ML9 is a versatile shunt to ground 2 x Single-Pole Single-Throw (2x SPST) RF antenna tuning switch. It is optimized for low COFF as well as low RON enabling applications up to 8.25GHz; ideally fitting for antenna tuning purpose. The BGSA200ML9 integrates on-chip CMOS logic and power supply regulation. Thanks to its 4 states USID1 and USID2 feature, it can be controlled either with GPIO lines or MIPI RFFE bus. Each switch throw can be programmed individually or altogether. Up to 3 instantiations of the same device can be controlled using the same RFFE bus when in MIPI RFFE mode. Datasheet Summary .infineon. Please read the Important Notice and Warnings at the end of this document page 1 of 2 Revision 1.0 2023-06-13 Two throws low resistance antenna tuning switch Block diagram and ordering information Figure 1 BGSA200ML9 Block diagram Table 1 Ordering Information Type Marking A2 Package TSLP-9-8 Product name BGSA 200ML9...