BTM9011EP Datasheet | Infineon

Features - Path resistance of typ. 175 mΩ at 25°C - Pulse current: - 5.2 A for tpulse ≤ 1 s at 85°C - 4.2 A for tpulse ≤ 10 s at 85°C - Supply voltage range from 7 V to 18 V - Extended supply voltage range from 4.5 V to 40 V - Current limitation of min. 10 A - Slew rate selection - Protection and diagnostics: overcurrent, undervoltage, overtemperature, open load detection, current sense, cross current protection - Status flag diagnosis with feedback of current sense - SPI interface in BTM9011EP - Half-bridge mode - Green product (Ro HS pliant) - ISO ready Potential applications - Automotive unidirectional and bidirectional brushed DC motors - Door modules - Mirror modules - Body control modules - Other inductive or resistive loads in the automotive field Product validation - Qualified for automotive applications - Product validation according to AEC-Q100 Product description MOTIX™ BTM9010EP/BTM9011EP integrated full-bridge IC is an integrated full-bridge for automotive motor drive applications. This monolithic device is implemented in BCD technology, and assembled in PG-TSDSO-14 which has an exposed pad to ensure better thermal performance. The device provides intelligent protection features against overtemperature, undervoltage, overcurrent, short circuit and crosscurrent. Moreover, the device also provides current sense and open load diagnostic as diagnosis features . The information of the output current and the error flag is presented at IS pin. Datasheet .infineon. Please read the sections "Important notice" and "Warnings" at the end of this document 1.0 2024-06-30 BTM9010EP/BTM9011EP Product description BTM9010EP Power supply Internal Supply Charge pump VS Power stage Gate driver INA Protection and Diagnostics...