BTT3050EJ
BTT3050EJ is Smart low-side power switch manufactured by Infineon.
Features
- Single channel device optimized for 24 V applications
- Electrostatic discharge protection (ESD)
- Overcurrent, active clamping and overtemperature protection
- Overtemperature latch shutdown
- Supply pin undervoltage protection
- Dedicated status signal
- Slew-rate control to adjust switching speed
- PWM switching capability of 20 KHz (duty cycle 10%-90%)
- Green product (Ro HS pliant)
- AEC qualified Potential applications Suitable for resistive and inductive loads. Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description
BTT3050EJ is a 50 mΩ single channel smart low-side power switch within a PG-TDSO-8 package providing embedded protective functions. The power transistor is built by a N-channel vertical power MOSFET. BTT3050EJ is monolithically integrated, automotive qualified and optimized for 24 V automotive applications.
VBAT
Voltage Regulator
IN OUT
Micro
VDD controller
I/O Status/ Reset
I/O PWM
Load
CVDD optional: e.g. 100n F
RSTATUS RSRP
STATUS
IN SRP
IC Logic
OUT GND
App_01
Datasheet .infineon.
Please read the sections "Important notice" and "Warnings" at the end of this document
Rev. 1.00 2022-01-18
HITFET™ +24V BTT3050EJ
Smart low-side power switch
Description
Table 1
Product summary
Parameter Operating voltage range Maximum load voltage ON-state resistance Nominal load current Minimum current limitation
Symbol
VOUT VBAT(OUT) RDS(ON)_25 IL(NOM) IL(LIM)
Product type...
