CCG6DF Datasheet | Infineon

description EZ-PD™ CCG6DF and EZ-PD™ CCG6SF are dual-port and single-port USB Type-C controllers that ply with the latest USB Type-C and PD specifications. These devices provide a plete USB Type-C and USB Power Delivery port control solution for PCs and notebooks. Both of these devices include a VBUS provider path load switch. These devices also contain a true random number generator (TRNG) for authentication, a 32-bit, 48-MHz Arm® Cortex®-M0 processor with 64-KB flash and 96-KB ROM, integrating a plete Type-C transceiver including the Type-C termination resistors Rp, Rd, and dead battery Rd termination. CCG6DF is available in a 96-ball BGA package, whereas CCG6SF is available in 48-pin QFN package. Applications - Notebooks and desktops - Thunderbolt hosts, non-thunderbolt hosts Features USB PD - Supports latest USB PD 3.0 specification - Fast role swap (FRS) - Extended data messaging Type-C - Integrated current sources for DFP[1] role (Rp) - Default current at 900 m A - 1.5 A - 3A - Integrated Rd resistor for upstream facing port (UFP[2])role - Integrated VCONN FETs to power EMCA cables - Integrated dead battery termination - Integrated high-voltage protection on CC and SBU pins to protect against accidental shorts to the VBUS pin on the Type-C connector - Integrated pass through SBU switch for 20-V protection Mux - Integrated USB 2.0 analog mux for USB 2.0 HS and UART data Notes 1. DFP refers to power source. 2. UFP refers to power sink. Datasheet .infineon. Please read the Important Notice and Warnings at the end of this document page 1 002-27161 Rev. - K 2023-08-30 USB Type-C port controller Features Integrated provider VBUS load switch - VBUS provider switch (5 V/3 A) - Slew rate controlled turn-on on the VBUS provider path, tolerant to 24 V - Configurable hardware-controlled VBUS overvoltage, undervoltage, overcurrent, short circuit, reverse current protection, and thermal shutdown - VBUS high-side current sense amplifier capable of measuring current...