CY7C65215 Datasheet | Infineon

CY7C65215, CY7C65215A USB-serial dual channel (UART/I2C/SPI) bridge with CAPSENSE™ and BCD Features - USB 2.0 certified, Full-Speed (12 Mbps) - Support for munication driver class (CDC), personal health care device class (PHDC), and vendor device class - Battery charger detection (BCD) pliant with USB Battery Charging Specification Rev 1.2 (Peripheral Detect only) - Integrated USB termination resistors - Two-channel configurable UART interfaces - CY7C65215 supports 2-pin, 4-pin and 6-pin UART interface whereas CY7C65215A supports 2-pin, 4-pin, 6-pin and 8-pin UART interface - Data rates up to 3 Mbps - 190 bytes each transmit and receive buffer per channel - Data format: - 7 or 8 data bits - 1 or 2 stop bits - No parity, even, odd, mark, or space parity - Supports parity, overrun, and framing errors - Supports flow control using CTS, RTS, DTR, DSR - Supports UART break signal - CY7C65215 supports dual channel RS232/RS422 interfaces whereas CY7C65215A supports RS232/RS422/RS485 interfaces - Two-channel configurable SPI interfaces - Data rate up to 3 MHz for SPI master and 1 MHz for SPI slave - Data width: 4 bits to 16 bits - 256 bytes for each transmit and receive buffer per channel - Supports Motorola, TI, and National SPI modes - Two-channel configurable I2C interfaces - Master/slave up to 400 k Hz - Supports multi-master I2C - 256 bytes for each transmit and receive buffer per channel - CAPSENSE™ - Smart Sense™ Auto-Tuning is supported through a Cypress-supplied configuration...