CYPAS213 Datasheet | Infineon

description EZ-PD™ PAG2S-PS CYPAS213 is an integrated secondary-side controller with USB Power Delivery controller and synchronous-rectifier. EZ-PD™ PAG2S-PS is targeted towards USB-C power adapters, it fits well into high-efficiency AC-DC flyback designs with USB Power Delivery, Qualm Quick Charge, and other standard charging protocols. EZ-PD™ PAG2S-PS also supports USB Power Delivery Extended Power Range (EPR) mode. Applications - USB-C chargers and adapters - USB-C chargers and adapters with EPR - Power adapters supporting both USB PD and legacy charging Features - Integrates secondary-side synchronous rectifier (SR) controller and charging port controller. SR controller has a turn-on propagation delay of typical 40 ns and a turn-off propagation delay of typical 25 ns. - Supports synchronous rectification in quasi-resonant (QR), critical conduction mode (Cr CM), discontinuous conduction mode (DCM), and continuous conduction code (CCM) and supports switching frequency up to 300 k Hz - SR driver works with both standard MOSFET and logic level MOSFET - SR driver supports differentiation between primary turn-on versus resonance oscillation to avoid false turn-on of SR gate-driver - USB PD 3.1 pliant with extended power range (EPR) support of up to 28 V VBUS - Supports USB PD 2.0, PD 3.0 with programmable power supply (PPS), QC5.0, QC4+, QC 4.0, QC 3.0, QC 2.0, Samsung AFC, Apple Charging, and Battery Charging (BC) V1.2 charging protocols - Integrates low-side current sense amplifier (LSCSA), 2x VBUS discharge FETs, and an NFET gate driver to drive the load switch and VCONN FETs to support EMCA cables - Configurable VBUS overvoltage protection (OVP), undervoltage protection (UVP), overcurrent protection (OCP), short-circuit protection (SCP), and system overtemperature protection (OTP) - Protects against accidental VBUS to CC short; electrostatic discharge (ESD) protection on CC, VBUS, DP/DM lines, and overvoltage on DP/DM lines - Integrates a 32-bit Cortex® M0+ with 64...