CYPD6139 Datasheet | Infineon

CYPD6129, CYPD6229, CYPD6139, CYPD6239 EZ-PD™ CCG6_CFP USB-C Power Delivery (PD) controller General description EZ-PD™ CCG6_CFP is a dual-port and single-port USB-C Power Delivery (PD) controller that plies with the latest USB Type-C and PD specifications. This device provides a plete USB Type-C and USB PD port control solution for dual-role power (DRP) host platforms. This device includes a VBUS provider path load switch with FETs, integrated current sense, integrated 3:1 SBU MUX with level-shifter and integrated 2:1 SBU MUX with level-shifter[1]. It also contains a hardware crypto block for secure firmware boot and authentication, a 32-bit, 48-MHz Arm® Cortex®-M0+ processor with 128-KB flash and 96-KB ROM, integrating a plete Type-C transceiver including the Type-C termination resistors Rp, Rd, and dead battery Rd termination. EZ-PD™ CCG6_CFP devices are available in a 52-lead QFN package that is pliant with the mon footprint package. Applications - Notebooks and desktops - Thunderbolt hosts, non-thunderbolt hosts - Augmented and virtual reality - Gaming systems - Docks downstream-facing ports (DFP)[2] Features - USB PD - Supports the latest USB PD specification, revision 3.2 - Fast role swap (FRS) - Extended data messaging - USB Type-C - Integrated current sources for the downstream-facing port (DFP)[2] role (Rp) - Default current at 900 m A - 1.5 A - 3A - Integrated Rd resistor for upstream facing port (UFP)[3] role - Integrated VCONN FETs to power EMCA cables - Integrated dead battery termination - Integrated high-voltage protection on CC and SBU pins to protect against accidental shorts to the VBUS pin on the Type-C connector - MUX - ITnytpeeg-r Catpeodr3t[:11] SBU MUX with level-shifter on one Type-C port for Alternate modes and closed chasis debug and 2:1 MUX with level-shifter on the other Notes 1. 2:1 SBU MUX is applicable only for EZ-PD™ CCG6_CFP dual-port devices. 2. DFP refers to power source. 3. UFP refers to...