CYT2BL5BAE Datasheet | Infineon

CYT2BL TRAVEO™ T2G 32-bit Automotive MCU Based on Arm® Cortex®-M4F-single General description CYT2BL is a family of TRAVEO™ T2G microcontrollers targeted at automotive systems such as body control units. CYT2BL has an Arm® Cortex®-M4F CPU for primary processing, and an Arm® Cortex®-M0+ CPU for peripheral and security processing. These devices contain embedded peripherals supporting Controller Area Network with Flexible Data rate (CAN FD), Local Interconnect Network (LIN), and Clock Extension Peripheral Interface (CXPI). TRAVEO™ T2G devices are manufactured on an advanced 40-nm process. CYT2BL incorporates a low-power flash memory, multiple high-performance analog and digital peripherals, and enables the creation of a secure puting platform. Features - Dual CPU subsystem - 160-MHz (max) 32-bit Arm® Cortex®-M4F CPU with - Single-cycle multiply - Single-precision floating point unit (FPU) - Memory protection unit (MPU) - 100-MHz (max) 32-bit Arm® Cortex® M0+ CPU with - Single-cycle multiply - Memory protection unit - Inter-processor munication in hardware - Three DMA controllers - Peripheral DMA controller #0 (P-DMA0) with 92 channels - Peripheral DMA controller #1 (P-DMA1) with 44 channels - Memory DMA controller #0 (M-DMA0) with 4 channels - Integrated memories - 4160 KB of code-flash with an additional 128 KB of work-flash - Read-While-Write (RWW) allows updating the code-flash/work-flash while executing code from it - Single- and dual-bank modes (specifically for Firmware update Over The Air [FOTA]) - Flash programming through SWD/JTAG interface - 512 KB of SRAM with selectable retention granularity - Crypto engine[1] - Supports enhanced Secure Hardware Extension (e SHE) and Hardware Security Module (HSM) - Secure boot and authentication - Using digital signature verification - Using fast secure...