Infineon Technologies ICE2BS01G
This stand alone controller provides several special enhancements to satisfy the needs for low power standby and protection features. The frequency reduction is limited to 20kHz / 21.5 kHz (typ.) to avoid audible noise.ICE2BS01G Specifications
- Package : SOP
- Mount Type : Surface Mount
- Min Input Voltage : 9V
- Max Input Voltage : 21V
- Nominal Input Voltage : 15V
- Max Output Current : 700mA
- Terminals : 8
- Circuits : 1
- Rise Time : 160ns
- Fall Time : 65ns
- Max Operating Temp : 125°C
- Min Operating Temp : -25°C
Source:
Octopart
| Part No. | ICE2BS01G |
|---|---|
| Datasheet | ICE2BS01G Download |
| Manufacturer |  Infineon Technologies |
| Description | PWM-FF IC |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
●
●
●
● Only few external Components required Input Undervoltage Lockout 67kHz/100kHz fixed Switching Frequency Max Duty Cycle 72% Low Power Standby Mode to support “Blue Angle” Norm Latched Thermal Shut Down Overload and Open Loop Protection Overvoltage Protection during Auto Restart Adjustable Peak Current Limitation via External Resistor Overall Tolerance of Current Limiting < ±5% Internal Leading Edge Blanking Soft Start Soft Switching for Low EMI
DESCRIPTION
In standby mode frequency reduction is used to lower the power consumption and provide a stable output voltage in this mode. In case of failure modes like open loop, overvoltage or overload due to short circuit the device switches in Auto Restart Mode which is controlled by the internal protection unit. By means of the internal precise peak current limitation the dimension of the transformer and the secondary diode can be lower which leads to more cost efficiency. Typical Application + 85 ... 270 VAC...
