Infineon Technologies ICE3B1065
The new generation CoolSET™-F3 provides Active Burst switchable Startup Cell Mode to reach the lowest Standby Power Requirements • Active Burst Mode for lowest Standby Power| Part No. | ICE3B1065 |
|---|---|
| Datasheet | ICE3B1065 Download |
| Manufacturer |  Infineon Technologies |
| Description | Off-Line SMPS Current Mode Controller |
| Buy | Stock & Price |
FEATURES
DESCRIPTION
● 650V avalanche rugged CoolMOS™ with built in <100mW at no load. As the controller is always active @ light load controlled by Feedback signal during Active Burst Mode, there is an immediate response● Fast load jump response in Active Burst Mode on load jumps without any black out in the SMPS. In Active
● 67/100 kHz fixed switching frequency Burst Mode the ripple of the output voltage can be reduced
● Auto Restart Mode for Overtemperature Detection <1%. Furthermore, to increase the robustness and safety
● Auto Restart Mode for Overvoltage Detection of the system, the device enters into Auto Restart Mode in
● Auto Restart Mode for Overload and Open Loop the cases of Overtemperature, VCC Overvoltage, Output
● Auto Restart Mode for VCC Undervoltage Open Loop or Overload and VCC Undervoltage. By means
● Blanking Window for short duration high current of the internal precise peak current limitation, the
● User defined Soft Start dimension of the transformer and the secondary diode can
● Minimum of external components required be lowered which leads to more cost efficiency.
