IM12B10CC1 Datasheet | Infineon

Description The CIPOS™ Maxi IM12B10CC1 product offers the chance for integrating various power and control ponents to increase reliability, optimize PCB size and system costs. It is designed to control three phase AC motors and permanent magnet motors in variable speed drives applications such as low power motor drives (GPI, Servo drives), pumps, fan drives and active filter for HVAC (Heating, Ventilation, and Air Conditioning). The product concept is specially adapted to power applications, which need good thermal performance and electrical isolation as well as EMI save control and overload protection. Three phase inverter with 1200 V TRENCHSTOP™ IGBTs and Emitter Controlled diodes are bined with an optimized 6-channel SOI gate driver for excellent electrical performance. Features Package - Fully isolated Dual In-Line molded module - Very low thermal resistance due to DCB substrate - Lead-free terminal plating; Ro HS pliant Inverter - 1200 V TRENCHSTOPTM IGBT7 S7 - Rugged 1200 V SOI gate driver technology with stability against transient and negative voltage - Allowable negative VS potential up to -11 V for signal transmission at VBS = 15 V - Integrated bootstrap functionality - Overcurrent shutdown - Built-in NTC thermistor for temperature monitoring - Undervoltage lockout at all channels - Low-side emitter pins accessible for phase current monitoring (open emitter) - Cross-conduction prevention - All of 6 switches turn off during protection - Programable fault clear timing and enable input Potential applications Fan drives and pumps Active filter for HVAC Low power motor drives (GPI, Servo drives) .infineon. Please read the Important Notice and Warnings at the end of this document page 1 of 22 V 1.00 2024-05-15 CIPOS™ Maxi IPM IM12B10CC1, 1200 V 10 A Product validation Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Table 1 Product information Base part number Package...