IM69D128SV01 Datasheet | Infineon

Features - Ultra-low current consumption in high performance mode (520µA) - Low current consumption in low power mode (180µA) - Signal to noise ratio (SNR) of 69d B(A) - Acoustic overload point at 128d BSPL - Flat frequency response with a low frequency roll-off at 30Hz - ponent level IP57 water and dust resistant - Package dimensions: 3.5mm x 2.65mm x 0.98mm - Enhanced RF shielding - Digital PDM output - Bottom port https://.infineon./cms/en/product/sensor/mems-microphones/mems-microphones-for-consumer/?redir Id=68316#!documents https://.infineon./cms/en/product/sensor/mems-microphones/mems-microphones-for-consumer/?redir Id=68316#!boards Potential applications - Active Noise Cancellation (ANC) headphones and earphones - Smartphones and mobile devices - High quality audio capturing - Laptops and tablets - Conference systems - Cameras and camcorders - Devices with Voice User Interface (VUI) - Smart speakers - Home automation - IOT devices - Industrial or home monitoring with audio pattern detection Product validation Technology qualified for industrial applications. Ready for validation in industrial applications according to the relevant tests of IEC 60747 and 60749 or alternatively JEDEC47/20/22. Description Discover the IM69D128S - an ultra-low power digital XENSIV™ MEMS microphone, designed for applications which require high SNR (low self-noise), long battery life, and environmental robustness in a small package. Great signal-to-noise ratio (SNR) of 69d B(A) enables crystal clear audio experience without promising on battery life. Enabled by a revolutionary digital microphone ASIC, the IM69D128S sets a new benchmark by cutting current consumption to 520µA - almost the half of what models with similar performance on the market can offer. Additionally, IM69D128S masters the art of switching between different power & performance profiles without any audible artifacts. IM69D128S is based on Infineon’s Sealed Dual Membrane MEMS technology which delivers high...