IMC302A-F064 Datasheet | Infineon

Features - Motion Control Engine (MCE) as a ready-to-use control solution for variable speed drives - Integrated script engine for application control customization - Integrated drive and system protection features - Field oriented control (FOC) for permanent magnet synchronous motor (PMSM) - Flexible space vector PWM for sinusoidal voltage control - Current sensing via single or leg shunt - Sensorless operation - Hall sensor operation using analog or digital Hall - Integrated analog parators for over-current protection - Built-in temperature sensor - Power factor correction (PFC) control (optional) - Flexible control input options: UART, Frequency, duty cycle or analog signal - Certified drive safety functions according to IEC/UL 60730-1 ‘Class B’ CPU subsystem - High-performance 32-bit ARM® Cortex®-M0 core - Single-cycle 32-bit hardware multiplier - 96 MHz MATH co-processor (MATH), consisting of a CORDIC unit for trigonometric calculation and a hardware divider unit - Nested vectored interrupt controller (NVIC) - Event request unit (ERU) for programmable processing of external and internal service requests - System timer (Sys Tick) for operating system support - Factory trimmed 48/96 MHz internal clock - Independent internal clock for window watchdog (WDT) and real time clock (RTC) - Low-power standby function - Serial wire debug (SWD) or single pin debug (SPD) On-chip memories - 128 kbytes on-chip flash with ECC and prefetch - 16 kbytes SRAM with parity munication peripherals - Universal serial interface channels (USIC), usable as UART, SPI and I2C interfaces - Multi CAN+, Full-CAN/Basic-CAN with 2 nodes, 32 message objects (up to 1 MBaud) Analog frontend peripherals - ADC with 12-bit resolution, 1MSPS, 2 sample and hold stages and multiple input - Adjustable gain on ADC inputs - Up to 6 channels of out of range parators (ORC) - Up to 3 fast analog parators (ACMP) - Internal temperature sensor (TSE) Datasheet .infineon. Please read the sections "Important...